CLI | Pressed Steel Housing with Bearing

¡ñ Automotive Bearings

¡ñ Clutch Release Bearing

¡ñ Tensioner & Idler Bearing

¡ñ Wheel Hub Bearing

¡ñ Hub Unit

¡ñ Water Pump Bearing

¡ñ Alternator Bearing

¡ñ Air-Conditioner Bearing

¡ñ Steering Bearing

¡ñ Mast Guide (Forklift) Bearing

¡ñ Roller Bearings

¡ñ Tapered Roller Bearing

¡ñ Cylindrical Roller Bearing

¡ñ Spherical Roller Bearing

¡ñ Needle Roller Bearing

¡ñ Spherical Roller Thrust Bearing

¡ñ Track Roller / Idler Roller

¡ñ Ball Bearings

¡ñ Deep Groove Ball Bearing

¡ñ Angular Contact Ball Bearing

¡ñ Thrust Ball Bearing

¡ñ Liner Motion Ball Bearing

¡ñ Self-aligning Ball Bearing

¡ñ Bearing Housing

¡ñ Pillow Block (Ball Bearing Unit)

¡ñ Plummer Block & Adaptor Sleeve

¡ñ Pressed Steel Housing with Bearing

¡ñ Spherical Plain Bearing & Rod End

¡ñ Spherical Plain Bearing

¡ñ Rod End

¡ñ Special & Non Standard Bearings

¡ñ Agricultural Bearing

¡ñ Stamping Bearing

¡ñ Center Support Bearing

¡ñ Special Ball Bearings

¡ñ Ceramic & Plastic Bearings

¡ñ Ceramic Bearings

¡ñ Plastic Bearings

¡ñ Self Lubricted Sliding Bearings

¡ñ DU Bearing [SF-1 Series]

¡ñ DU-B Bearing [SF-1 Series]

¡ñ DP4 Bearing [SF-1 Series]

¡ñ PMDX,MBDX Bush [SF-2 Series]

¡ñ HX Bearing [SF-2 Series]

¡ñ Bi-metal Bush [SY Series]

¡ñ Oil Impregnated Bushing [PM]

¡ñ Wrapped Bronze Bush [FB Series]

¡ñ Solid Lubricant Bearing [JDB]

¡ñ Ball Retainer [FZ Series]

¡ñ Machined Bronze Bearing

¡ñ Slewing Bearings

¡ñ Single-row Ball Slewing Bearing

¡ñ Double-row Ball Slewing Bearing

¡ñ Three-row Roller Slewing Bearing

¡ñ Crossed Roller Slewing Bearing

Pressed Steel Housing with Bearing

¡ò SBPP200 and SAPP200 type pillow blocks are types of which SA200 type with eccentric locking collar and SB200 type with setscrew bearings are assembled respectively into a two-piece pressed-steel housing. SBPFL and SAPFL type has only two blot holes. It needs smaller mounting space. Its function is the same as the above-mentioned pressed pressed flanged housing.

¨‹ SBPP200 SAPP200 (Light Duty)	¨‹ SBPFL200 SAPFL200 (Light Duty)

¡ò The below two types of pressed steel housing consist of two pieces of pressed steel plates, mounted with SA200 or SB200 bearing. It has light weight and simple structure, which is applied to the machine of which the rotating speed is low or medium or the machine is light. This type has the same function as the pressed round flanged housing. It can be used where the mounting space is limited, because it takes smaller space.

¨‹ SBPF200 SAPFT200 (Light Duty)	¨‹ SBPF200 SAPFT200 (Light Duty)

¨‹ Catalogues

¡ñ SBPP200, SAPP200	¡ñ SBPFL200, SAPFL200	¡ñ SBPF200, SAPF200
¡ñ SBPFT200, SAPFT200