CLI | Spherical Roller Bearing

¡ñ Automotive Bearings

¡ñ Clutch Release Bearing

¡ñ Tensioner & Idler Bearing

¡ñ Wheel Hub Bearing

¡ñ Hub Unit

¡ñ Water Pump Bearing

¡ñ Alternator Bearing

¡ñ Air-Conditioner Bearing

¡ñ Steering Bearing

¡ñ Mast Guide (Forklift) Bearing

¡ñ Roller Bearings

¡ñ Tapered Roller Bearing

¡ñ Cylindrical Roller Bearing

¡ñ Spherical Roller Bearing

¡ñ Needle Roller Bearing

¡ñ Spherical Roller Thrust Bearing

¡ñ Track Roller / Idler Roller

¡ñ Ball Bearings

¡ñ Deep Groove Ball Bearing

¡ñ Angular Contact Ball Bearing

¡ñ Thrust Ball Bearing

¡ñ Liner Motion Ball Bearing

¡ñ Self-aligning Ball Bearing

¡ñ Bearing Housing

¡ñ Pillow Block (Ball Bearing Unit)

¡ñ Plummer Block & Adaptor Sleeve

¡ñ Pressed Steel Housing with Bearing

¡ñ Spherical Plain Bearing & Rod End

¡ñ Spherical Plain Bearing

¡ñ Rod End

¡ñ Special & Non Standard Bearings

¡ñ Agricultural Bearing

¡ñ Stamping Bearing

¡ñ Center Support Bearing

¡ñ Special Ball Bearings

¡ñ Ceramic & Plastic Bearings

¡ñ Ceramic Bearings

¡ñ Plastic Bearings

¡ñ Self Lubricted Sliding Bearings

¡ñ DU Bearing [SF-1 Series]

¡ñ DU-B Bearing [SF-1 Series]

¡ñ DP4 Bearing [SF-1 Series]

¡ñ PMDX,MBDX Bush [SF-2 Series]

¡ñ HX Bearing [SF-2 Series]

¡ñ Bi-metal Bush [SY Series]

¡ñ Oil Impregnated Bushing [PM]

¡ñ Wrapped Bronze Bush [FB Series]

¡ñ Solid Lubricant Bearing [JDB]

¡ñ Ball Retainer [FZ Series]

¡ñ Machined Bronze Bearing

¡ñ Slewing Bearings

¡ñ Single-row Ball Slewing Bearing

¡ñ Double-row Ball Slewing Bearing

¡ñ Three-row Roller Slewing Bearing

¡ñ Crossed Roller Slewing Bearing

Spherical Roller Bearing

¡ò CLI manufactures a complete range of spherical roller bearings from 25mm to 1.5m bore diameter with the option of parallel or tapered bores. Other sizes may also be available on request. Spherical roller bearings can support high radial loads and moderate axial loads in either direction. They are also suitable for applications involving moderate shock or impact loads.
¡ò The inner ring guides two rows of barrel-shaped rollers, with a single spherical outer ring raceway. As such, these bearing can accommodate a varying degree of misalignment depending on their size, but normally between 0.018 and 0.045 radian (1 to 2.5 degrees) with average loads.
¡ò Different cage materials are available for these bearings including steel, brass or polyamide depending on the requirements of the application. These bearings are also available with an oil groove and holes in the outer ring for re-lubrication purposes.

¡ò Design Type: MA - Design (integral central lip on the inner ring and machined brass cage, outer ring riding);
                              MB - Design (integral central lip on the inner ring and machined brass cage, inner ring riding);
                              C - Design (floating rib on the inner ring and pressed steel cage, symmetrical rollers riding);
                              CA - Design (modified inner design, increased basic load, one piece machined brass cage);
                              CAB - Design (modified inner design, increased basic load, rollers with inner holes, two- piece cages assembled;
                              K - Design (tapered bore bearings, taper 1:12); · K30 - design (tapered bore bearings, taper 1:30).
¡ò Technical Executions Conditions:
     a) Dimensions: The main dimensions of spherical roller bearings are in accordance with ISO 15.
     b) Tolerance Class: P0, P6, according ISO 492.
     c) Radial Clearance: Normal and on demand, C2, C3, C4, C5, according to ISO 5753.
     d) The basic load ratings are established with ISO 76 and ISO 281.

¨‹ Catalogues

22200 Series	22300 Series	21300 Series	23000 Series
23100 Series	23200 Series	23900 Series	24000 Series
24100 Series